Power off, lid off, strip front of machine off,sounds daunting but its not support control panel (make a note of where wires go)swinging the front panel to the RIGHT means the door wiring stays on. Undo banding holding old seal, mount the new seal with the drain holes at the bottom push seal CHECK ITS ON OVER THE LIP from the bottom to the top,when happy refit clamp and tighten, refit front of machine easy the door seal through the hole ensure not twisted when happy fit the end of the wire band onto the peg follow the wire around ensuring its in the groove when happy insert ratchet clip and squeeze into place.
wirecutterman, January 2008
