In replacing the door lock on my Dishlex Global 300 dishwasher I have accidently dissconnected the spade connectors on the door mounted control unit. The connection points are marked with their function but the cables are not corrospondingly marked (although they each have a unique number). How can I be sure to connect the cables correctly?

Robert, February 2008

Hi Anthony,

I also face some problem with that dishwasher and would appreciate if you could send the diagram to my email below.
boboleharicot hotmail.com
Thanks
Brgds
Laurent

LAURENT, August 2012

can anyone please e,ail me this information also the color of the wires that plug on...thankyou....chrisparsons@optushome.com.au

and l would have to confirm the dry joints due to the closing of the door....also the board you bought would have been a repaired one....and not new....take the board back under warranty..

chris parsons, June 2008

I had a similar problem and found a wiring diagram on the net but I can't remember where. I do have the diagram in front of me and can tell you the connections. In order from the bottom up.
Switched Neutral - B1 cable
Pressure Switch - B2
Neutral - B3
Active - B4
Heat - B5
Wash - B6
Drain - B7
Hot - B8
Cold - not used on Global 300
Half Load Valve - Not used
Dispenser - B11

If you are prepared to give your email address, I could send you the diagram.

Anthony, March 2008