home Fix label Heating label_important Home Heating Systems category Baxi

baxi combi 105e air flow monitor keeps flashing before firing up?

baxi combi 105e monitor neon keeps flashes before firing up sometimes takes two minutes to fire up

ron, March 2008

home Fix label Heating label_important Home Heating Systems category Baxidone

Its likely to be a faulty air pressure switch. This senses the fan is running when it should be. It is a remote possability it is a slightly blocked venturi. This is built into the fan.
This needs checking out by someone Corgi reg.

graham, March 2008

Sounds like the tubes to the air pressureswitch are clogged up.Isolate from the electricity,remove the cover,connected to the fan you'll see some tubing,remove these,and blow out,then replace.While you're at it,make sure the seal around the casing is sound as well.

Graeme, March 2008

link Click here to see other fixes for Baxi 105E.

Fix Fault - Heating

home label Heating label_important Home Heating Systems

home Fix label Heating label_important Home Heating Systems category Baxi

baxi combi 105e air flow monitor keeps flashing before firing up?

I can answer this question...

baxi combi 105e air flow monitor keeps flashing before firing up?

I can answer this question ...

baxi combi 105e air flow monitor keeps flashing before firing up?

How do I work my Storad storage heater?

F40 fault?

Remove cover off gas boiler?

Myson Touch?

Morco gb 24?

Siemens RDJ10RF thermostat problem?

Vaillant F22 fault?

Greenstar Highflow 440?