4 hours ago Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Jacky asked ... Miele Vacuum cleaner?    |    Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Click here to ask your question

My dishwasher has become very slow to finish, often not draining fully?

The dishwaster is slow to complete its cycles, often not finishing the drain part. This morning it was showing 0 mins remaining, yet the motor still sounded like it was trying, and there was water left in the unit.
Often a small amount of water seems to be leaking too - although its so small it doesn't reach further than under the machine (I see the wet when i pull the machine out.

Its a Hotpoint DWF61, freestanding. Approx 7 yrs old. I have checked & cleared the drain hose. It seems to pump fine when checked. Some mornings its washed fine too. Although its always slower than anticipated (ie 2 hour wash might take 4 hours).

Finally - when filling it often 'thumps' as though the water is being turned on & off abruptly every every 1 or 2 seconds. Leaving the power off between washes *seems* to help?

Any thoughts? Can I investigate myself? I have taken the door & side panelling off, but am not too sure what I am looking at :-)
Alastair Cairns, March 2008
I'd like to add now that I have been looking with the panels removed, it seems that it fills; then starts the motor & starts to empty & so gets a bit stuck. Does this sound llike a stuck drain valve. Not sure how to identify this?

Alastair Cairns, March 2008
link Click here to see other fixes for Hotpoint.