Michael asked ... Mountfield empress drive belt?    |    John Barton asked ... How do i clear the TAM?    |    John asked ... How can I mend my binatone veva 1210 handset?    |    Kurt asked ... How can i mend my Aiwa HV-FX7700K?    |    Laetitia asked ... Toyota overlocker model 3400 D?    |    Click here to ask your question

Royal crosscut paper and cd shredder PX110MX repair?

My Royal PX110MX paper and cd shredder (2 months out of warranty) will not automatically shut off. I have thoroughly cleaned the cutting blades and even removed the protective housing around the blades to expose the circuitry, wiring and switch. Sometimes it will start up immediately upon turning it on, sometimes not. It started by itself in the middle of the night when I accidentally left it in the standby mode. It never shuts off after shredding paper whether it is one piece or 20 pieces unless I tap the reverse button while it running. Sometimes there is a second click when turn the unit on and that is a sure indication that the unit will run continuously.
Tom, March 2008
Did you try cleaning the surfaces of the paper sensors?
They look like the LED s on the end of your remote control. If they are dirty, or blocked the paper shredder 'thinks it sees a sheet of paper there. If they are clean, then either they, or their associated control circuitry are defective.

Three finger Fred, November 2018
How can I unjam this paper shredder. there has to be an easy way. The number vf1000mx. thanks.

jan doan, December 2009
yes.my royal crosscut paper shredder,when on auto, runs but doe not advance inserted paper for shredding.how do I repair it?

shah madhukar d., May 2008
I've got the same model with the exact same problem. I am going to contact Royal directly to see what can be done. Will come back here to post what I find out.

John, April 2008