I previously asked for some help on my Britony flexi flue boiler the symptons are, for some time now I have only had luke warm water although the flame seems ok, the high speed fan runs on when closing the hot tap and will only go to normal on running the cold tap, having been away for a week with the boiler switched off I have now found the high speed fan cuts in immediately when I switch on electric supply and cannot be stopped the pilot although it will ignite it goes out when I turn the nob around, so no hot water at all now, the answer from one of your experts was to change the PCB, this I have done at a cost of £147 regretfully there is no change I have tried to adjust the fan but no good has anybody any further suggestions I would very gratefull if they have thankyou David Inglis

David Inglis, April 2008

I have a Britony flexiflue boiler and the problem with IT is that the water is lukewarm.., I've got the diaphragm replaced but still no improvement... Can someone help please????

Natasha, January 2015

Hi David, Sorry I can't help with the fault but I've just taken out a perfectly good Britony Flexi Flu boiler from a flat that's being refurbished. (I've had central hearting installed). It works perfectly and has been regularly serviced by British Gas. My heating engineer who took it out thinks it's quite new. It's for sale. Are you interested? Johnmildred - at - onetel.com
Thanks John.

John Mildred, March 2009

Sounds to me like your water governor is faulty. You need to get a CORGI registered engineer to look at it. If you have fixed it can you please let me know what the problem was?

Peter, October 2008