Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Jacky asked ... Miele Vacuum cleaner?    |    Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Click here to ask your question

Beko 1510 drum bangs on fast spin?

Hi,
Washing machine works fine until it starts to spin fast. Then it seems to bang as if an uneven load is in. I have taken off the back and all the springs are ok. Could it be the suspension legs attached to the outer drun are worn?
Beko 1510 about 3 years old.

Thanks to anyone that can help.
Jim wright, April 2008
if it is like my 1614, the weight fixed to the front of the drum at the top will have moved forward on it's mounts and be hitting front of machine on spin. Unscrew and remove plastic cover for switches and loosen torx screws, push weight back ontp drum and retighten screws

Mark, June 2008
Thanks for reply. I can see a weight at the top of drum which is fixed nice and tight .Is their a weight at bottom as well then ,couldn't see it when I looked.

Jim Wright, May 2008
hi mate had the same problem it was the weight under the drum if you tip the machine backwards there is a few 13mm bolts check if there tight just an idea

gav, April 2008
link Click here to see other fixes for Beko 1510.