WHEN I PUT THE WASHING MACHINE ON TO WASH, IT WILL START AND RUN. HOWEVER, WHEN IT REACHES SPIN CYCLE, IT STOPS AND STARTS MAKING A CHATTERING NOISE AND LIGHTS START FLASHING. IT THEN WONT DRAIN AND WATER IS RETAINED IN DRUM.
I HAVE CHECKED DRAINAGE FOR BLOCKAGES AND THERE ISNT ANY, I THEREFORE BELIEVE IT MAY BE THE PUMP SO I WOULD JUST LIKE SOME ADVICE IF I COULD BUY THE PUMP, AND ALSO ADVICE ON HOW TO CHANGE IT

THANKS
DARREN

DARREN, May 2008

I had a similar problem with mine (aquarius wf530p), it could just possibly be your pump is clogged, try putting the machine on its side and removing the pump ( just remove the water hoses and the little electrical connector and pull the pump out, you'll need a couple of phillips screwdrivers and a set of allen keys, disassemble the pump and clean the spindle and wash it out, then put everythingh back 2gether it shud wourk...did for me..let me know how you get on

Doggyboy2008, May 2008