during high speed spin cycle {900 or 1200},the top half of machine vibrates considerably such that the machine starts to move"walks" along kitchen solid linolium floor,and eventually stops as it hits the wall-mounted boiler. At lower spin speed it seems to stay where it is.
could you please throw any ideas to stop this problem!

mr. m.k.mistry, June 2008

Mine did the same and now it wont spin at all, opened the back and there is an issue wih the belt and wheel the belt goes around.

Could be the same isse.

Del, September 2008

faulty springs or shockers would cause this fault.also make sure machine is on a level floor with all feet on the floor (no movement in cabinet when rocked about by hand)

ck, June 2008