Michelle asked ... How can I fix a error?    |    Tusch asked ... Fisher & Paykel Smart Drive 9 Pride 5.5 Model MW05559AU FP WH?    |    Dwayne B. asked ... Intermittent (twice) Then Complete Loss of Power?    |    Aunt Bee asked ... Bernina Update 1630 work light not working?    |    Larry asked ... Hybrid Weed wacker not working with battery?    |    Click here to ask your question

dual flush toilet keeps running after flush?

my toilet keeps running in after flushing which I would guess is the overflow. i opened up the cistern and it looks so different to normal ball toilet I don't know where to start. can nayone give idiots guide instructions?
julie, July 2008
I also had this problem and after removing the lid off the back of the toilet I poked around and discovered a backflow prevention tag that was attached with a string had fallen down under the water regulator thingy, causing the toilet to run. Saved myself quite a plumbing bill - and I'm a girl...: )

nancy, June 2009
received a tip see below: prick the bubbles on the grey seal with a pin and the seal is now perfect. no moer running water.Thanks so much and such a cheap answer!

julie, July 2008
thanks> A plumber came round today and took it apart and confirmed that it was rubber seal that had bubbles all over it. It is a "german system" and not unusual. Needs a new seal. thanks

julie, July 2008
Julie,

Check out this thread
http://www.howtomendit.com/answers.php?id=74282
you may have the same problem

Gary, July 2008