home Fix label Household Appliances label_important Washing Machines category AEG

How can I fix my AEG oko lavamat 6555 sensor logic?

My AEG OKO Lavamat 6555 washer is showing error code F9. Can any body help me to reset it please.

Julie Vaughan, July 2008

home Fix label Household Appliances label_important Washing Machines category AEGdone

hold in the top two buttons (pre wash and quick wash) when the machine is off, then whilst turning the knob one click anti - clockwise to short spin from the off state. All lights come on, then turn knob clockwise to off again. This worked for mine. Actually I learned it from the first answer in this page and I want to thank him/her

Hamid, November 2010

hold in the top two buttons (pre wash and quick wash) whilst turning the knob one click anti - clockwise to short spin. All lights come on, then turn knob clockwise to off. This worked for mine.

BJG, September 2010

You can reset it by holding in the top two buttons and turning from off to short spin. This will do a light test and reset.

KDH, August 2008

If it is the same as mine, it is not the brushes because this machine has a brushless motor.

KDH, August 2008

motor brushes are worn out fault code i think.

ck, July 2008

my LG washer shows SE when there is a problem with the pump. refer to your manual could be your pump as different washers show different symbols

babs, July 2008

link Click here to see other fixes for AEG Oko.