My Potterton Profile 80e runs but will not ignite, the fan is running but no spark or ignition. The fault is intermittent and if left with the thermo wheel turned off for a while and then turned round to 3or 4 it will ignite however fault reccurs after a few days. I have tried the rest but this makes no difference. Any suggestions

cheers

Steve Guild, July 2008

Hi there.There is no voltage going out the pcb to the gas valve and no sparks,so the pcb is faulty.


Abu zaid

abu zaid, August 2008

does it make any noise as if its try to spark etc?

hi-spec plumbing & heating (essex), July 2008