I have a 12 year old version of the above washing machine and have noticed that recently the drum has become misaligned. It still turns, spins etc, just the whole assembly isn't mounted straight in the machine. The gap between the drum and door is much smaller on one side than it is in other. The concrete weights are in place, springs in place, and the dampers appear to be ok (although one is slightly softer than the other). Any suggestions as to what could be causing this!? Thanks!

Seb, August 2008

I am not familiar with your m/c but if the inner and outer tubs are in line and these are out of line with the m/c body, on some machines there are two stainless steel sprung wires at the top of the m/c holding the outer tub central between the m/c shell. One of these wires may have broken so that the weight of the drums is pulling it to one side.

Jeff, August 2008