Fix Fault Miele W800

Hi i have a Miele W800 novotronic with a faulty triple inlet valve which is connected with a four pin connector ,i can only find valves with six connection types which apparently have the WPS system. ... more

I have just changed the dampers on my Miele W800 - thanks for the excellent information - but the machine won't switch on! The fuse is ok & when I press to start, the "on " light comes on for millise ... more

I have just read the article on changing the shock absorbers on a miele novotronic w800, how much more difficult is it to change them on a miele navitronic w2888wps. I am assuming the fault diagnosis ... more

The programme selector dial isn't as 'positive' as before. I opened the door, removed the electronic board and noted that plastic plate (3871211) that links the dial on the front, to the electronics i ... more

Having cleaned the filter, I tugged quite hard on the 'ring-pull' door release to move it away from the little filter door. Now I can not close the drum door at all. What have I done?

When at the end of the wash cycle before it rinces the drum begins to bounce around wildly, so much so that it hits the inside of the machine and causes sparks to fly. This looks as if the springs or ... more

Miele W800. No spin cycle. Select spin, drain pump seems to run ok [no blockages, impeller turns and water comes out the front if you don't put the plug-seal back :-)]. Drum doesn't turn (did twice ... more

My Miele W800 washing machine needs new drum bearings. It is thirteen years old so out of warranty. I have opened the front up but need to know how to get the drum out. Can anybody advise me how?