Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

HOW CAN I GET POER TO MY SWITCH?

I am putting up an outside light no pir.I have got the power cable 1.5 twin an earth to the outside wall. I then put cable from an indoor 2 gang switch up and out to outside wall. I have plastered over channel from switch, but i relise i have no power to it. any one got any advice would be welcome ps. i have tiled over it as well
ARNIE, August 2008
jack is correct with what he telling you lic master agrees.

jack`s freind, August 2008
My guess is you are looking for power and it should come from the circuit box to your switch. Only the black or power wire needs to connect to the switch, while the white and ground wires go on up to your light. Then the black wire to the light goes on the other teminal of the switch.

Jack, August 2008
call an electrician

anon, August 2008