its a nissan primera gt r reg i changed the batteries in the remote now it does not work and nissan say they cant do it without the code which i dont have because i bought it off dave hales please help

chewy, August 2008

Ensure all the doors have been unlocked, either by using a good transponder key or remote control plip key.

1. Turn the ignition switch from Position 0 to ON (I.E. dashboard lights on but don't start engine) 6 times within 10 seconds.

2. Then turn ignition switch to OFF position. Leave key in ignition switch.

3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice.

4. Press and HOLD the unlock button on the Plip.

5. WHILE HOLDING IN THE UNLOCK BUTTON, press the lock button 3 times.

6. Release the unlock button.

7. The warning lights will flash once to indicate successful programming.

8. Repeat procedure 4 to 7 for up to 4 remote keys.

9. When completed turn ignition ON, and the warning lights will flash 2 times.

10. Remove key, and check all remote keys for operation.

Brian.J., August 2008