Michelle asked ... How can I fix a error?    |    Tusch asked ... Fisher & Paykel Smart Drive 9 Pride 5.5 Model MW05559AU FP WH?    |    Dwayne B. asked ... Intermittent (twice) Then Complete Loss of Power?    |    Aunt Bee asked ... Bernina Update 1630 work light not working?    |    Larry asked ... Hybrid Weed wacker not working with battery?    |    Click here to ask your question

how much water should remain?

After flushing my low level toilet how much water should remain in the cistern? I have replaced the diaphram in the syphon, I have a water level up to the overflow and the operation of flushing is OK but there appers to be about two to three inches of water remaining in the cistern after the flush. Should this be the case?
RuffieS, August 2008
It is not uncommon for water to remain in the cistern it can depend on type of syphon and flush mechanism you have. Some flushes give a half or a full flush depending on how they are operated. Some syphons are adjustable to how much water they let out in a single flush. eg if your flush is set to say 10lt and your tank holds 12lt then 2lt will remain etc. It may be that the level is a little too high meaning water is not all used. Most cisterns will have a fill level marked somewhere on the inside. Try adjusting your filler to this level.
However I would say that as long as the flush is good enough to clear the bowl then dont worry.

Robin S, September 2008