How do I remove the clutch drum assembly on My Ryobi 790r grass trimmer

roger, August 2008

was looking for Troy-bilt answer to this question and found this,,,

http://troybilt.custhelp.com/cgi-bin/troybilt.cfg/php/enduser/std_adp.php?p_faqid=390&p_created=1043176904&p_sid=7S_aENej&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NDEsNDEmcF9wcm9kcz0wJnBfY2F0cz0wJnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1jbHV0Y2ggZHJ1bSBhc3NlbWJseQ**&p_li=&p_topview=1

BrianC, September 2008

It takes a special Torx T20 screw driver and you will have to grind down the shaft of the screw driver to fit down in the clutch drum shaft hole. It is right hand tread and same driver should fit all the torx screws. Good Luck!

Roger Haslip, August 2008