Beeping does not stop after taking out batteries, switch off from electrics switching on again pressing x/TM & CL

mandy, August 2008

Hi Mark

Your advice helped me solve a similar problem with my XE-A102 and now it works fine. The advice saved me buying a new cash register. Thanks again !!!

Paul

Paul, February 2009

Hi. It sounds like you are half way through a full RAM clear. To completely clear all programming and start again,

Turn key to REG mode.
Take any battery out (just one).
Turn power off at wall.
Leave for about 30 mins to make sure unit discharges.
Turn power on at wall.
After a short while, and possibly three beeps, it should come to life.
Now put battery back in.

Give it a try, and let me know if you still have problems

Mark, August 2008