Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

why does my hotpoint aqurius first edition ?

why does my hotpoint aqurius first edition few 12 have water coming out of the drawer where you put the powder and conditioner ,and it seems to be filling up to much,,,,it only does this when machine full,,,,runs perfect empty,,,but as soon as you put even a few clothes in it does this,,,any ideas?
mark tongue, September 2008
the presure system is probley blocked. you can find this if you take off the lid (don't forget to turn the power off 1st) and to the right hand side you will find a round switch with an air pipe atatched. you can either detatch this an blow down it to clear the presure bottle or you can follow the pipe down to the bottle remove it and clean it under the tap i would recomend this rather than blowing unless you have a good pair of lungs.

Colin, September 2008
your washing machine either needs new pump but i guess the sump hose connecting to drain pump is blocked most likely with a sock!!!!!!!

tariq, September 2008
link Click here to see other fixes for Hotpoint.