Hi Mark
Our Towa has plastic cover and paper underneath. Also can you tell me how to reprogramm a ERA570 as the operation manual is very hard to follow and does not specifically show reprogramming.
Regards Di

Response:
Hi. I need to know if your keyboard on the Towa is flat plastic with a piece of paper under it, or individual raised buttons that you press down. If it is the raised type, it will have the FEED button on the far left of the keyboard just above the key that you turn.

Sharp 1077:

Turn key to PGM mode.
Type new price in dollars and cents with no decimal point e.g $3.50 = 350.
Press the department (item) button to set the price to.
Press TL (the Cash button)

Mark
September 2008

Di, September 2008

Ok. The Towa is a bit of a pain, as the notes say you need to link to departments as well.

Turn key to P mode
Type the PLU number to be changed on the numeric keypad, then press 'PLU' button.
Type new price (without decimal point)
Press the department button (Category buttons - normally next to the numeric keypad) which corresponds to the type of item you are changing.
Then press CASH.

I have not programmed these before, so I think that will do it. If you haev trouble understanding, just let me know.

As for the ER-A570,

Turn key to PGM2 mode.
Type 1210
Then press . (decimal point)
Then press X (multiplication. Sometimes labelled @/FOR)
Then type the PLU number to be changed (using the numeric keypad).
Then press X
Then type new price (no decimal point)
Then press ST (SUBTOTAL)
Then press TL (CASH)


Try those out.

Mark, September 2008