guys i am from turkey, just have same problem, i have pegeout boxer panelvan teyp, it displays "CANCHECK" on screen, can anyone know how to make it, if so, please share that her, also keep following here thank you
drkasim, February 2013
And are you sure that the radio is from that car?
If you are not the first owner, maybe the previous owner has just dropped-in a radio that was lying without use.
"CANCHECK" message is usually shown by Fiat and Alfa Romeo radios. I can't find any information about such kind of message on a Peugeot radio.
Contact a Peugeot dealer and ask what they told about this problem.
A.R.S., December 2012
During power-up, the radio checks the car's unique identification information via the CAN bus. If the radio is retrofitted into another car, the information will not match the previously stored in the radio EEPROM memory. As a result, an error message of "CANCHECK" will appear or the radio will request the code.
You need to check if all wires are properly connected to the radio. The radio needs to receive the CAN bus signal to operate.
If the wires are connected but you still see "CANCHECK", you will need to have the radio reprogrammed by a professional decoding specialist.
A.R.S., December 2012
With most radios you press button 1 until the first number of the code appears on screen,then button 2 for the second code number and so on,then press button 5 and it will come on!Hope.
