My Hoover 2320L seems to have stopped sensing when to stop filling the water. Whether we choose Low, Medium or High it fills to the brim. How do I fix this?

Henry Oorjitham, October 2005

Sometimes the tube to the level switch has worn through or pulled out of the mount, so reseat if loose or replace tube if damaged.

Stryder, September 2008

If it still has the same cutoff system my older hotpoint top loader had it's most likely the air displacement cut off bottle valve has stuck, on mine it's found in the back of the machine on the outer water drum. remove the top thin tube off the bottle stick annother free end tube over the nipple of the bottle and blow very hard or fix a bike pump to the tube then pump and you should hear a click when the valve frees. Good luck

Bob of Worthing, October 2005