I have removed the drum from my hotpoint wma30 after the bearings had worn out..the problem i have is not been sure of how to remove the old bearings..any help would be appreciated thanks.

martin sadler, August 2004

Hotpoint do a special bearing puller just for the purpose. Unfortunalely they are probably pretty expensive. THe best bet is probably to have someone who has one (service centre would be a good bet) to do it for you. Phone them up and see if they will remove the bearing for you for a nominal fee if you take the drum to them

Pete., December 2004

Although bearings can be purchased for the WMA series the whole drum assembly was designed to be replaced as a unit
Part no 1603410

Paul, August 2004