i replaced the light bulb (40w like recommended in manual ) . I realize now that even though it says 40w, the old ones were 20w) therefore it seem to have blown a fuse in the microwave. I want to try and replace the fuse in the microwave but not quite sure where it is.

tiffany, October 2005

This is Sai again. I forgot to mention in my previous reply that you have to disconnect the microwave from the power supply before taking it apart.

Sai, December 2005

To get to the fuse, you need to remove the vent and the touch screen panel. The vent is held to the microwave by two screws. Remove the screws and then the vent. Once the vent is removed, you should see a screw on top of the touch screen panel. Remove the screw then push the touch screen panel from the bottom. Now grap the top of the panel and pull towards you. You should be able to see a white fuse in the space behind the touch screen panel. I hope this will help.

Sai, December 2005