i have bled my radiators and now the pilot light keeps going out.

vernon, October 2008

I have inserted the white key and loosened the grey knob to repressurise but nothing happens the pilot light keeps switching on and eactly 30 seconds later turning off. then the water and central heating lights flash slowly. I press rest and still nothing happens, but I still get hot water in my shower but not in my taps? can someone expalin please??

Ed187, November 2008

The cdi has an integral filling loop. You need the white T key! There are two different sizes of key. Try plumbcenter. You put the ey in the slot at the bottom of the boiler, turn to lock then open the grey nurled knob next to the key slot.

James the heating engineer jimdaniels@btinternet.com, October 2008

hi yes plumber here what you need to do is find the filling loop to the boiler if you have one and repressurise the boiler to 1.5 bar pressure it should be aflexi pipe somewhere under the boiler with tap valves on bothends
If no luck phone me 07932750470 Mel

Melvyn Peter Cockell melplumbing@hotmail.co.uk, October 2008