Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Jerry asked ... Alpine 7287?    |    Guy asked ... Gaggenau fridge alarm problem?    |    Click here to ask your question

How do I remove a Hygena APL8224 semi-integrated door front?

Hygena APL8224/3 semi-integrated dishwasher has a wooden decor panel - but no obvious fixing screws.

Any idea how it's retained, or is it glued in place?
MacP, October 2008
hit it with a hammer

stu, March 2011
the fixings are on the inside of the door. 2 screws left and right side. loosen slightly and your panel should unclip

lee clemison, January 2010
Hi Mac, anything is possible as all fitters are different and if it did not go well, they may have glued it.If it is fitted as per instructions, you take out the bottom screw both sides and the 2nd from bottom both sides.These hold four fixing clips on the decor door,push the decor door up and out.If the plastic spacer grid is in the way,take this out first.Gently move side to side and then pull.
All the best.

FOXY, October 2008
link Click here to see other fixes for Hygena APL8224.