how do you program a new remote key for a transit mini bus 07 17 seater long wheel base

michael, November 2008

Hi sorry Michael read that wrong the other night if you search the intrnet there is info on how to do this i only have the info to code in a remote fob not the key

kev, November 2008

Try this michael i know it works on the 2000-2006 model

**You must have two original keys to perform this procedure. If you only have one key, you WILL have to take it to the dealer to get it programmed**

1. Insert and existing (working) key into the ignition cylinder.

2. Turn the ignition cylinder ON (RUN) and back to OFF. Ignition should stay on for at least ONE SECOND.

3. Remove the existing key and, within TEN seconds, insert a second working key and turn it to ON (RUN) and the back OFF. Ignition must be in ON for at least ONE second, but no more than TEN seconds. Remove the key.

4. Insert the new key before TWENTY seconds have elapsed and turn it to ON (RUN). Leave it the ON position for at least ONE second and turn back to OFF.

5. The security light will light up for THREE seconds to indicate that the new key has been successfully programmed.

6. To program additional keys, repeat steps 1 through 5

kevin, November 2008