Any ideas?, I hear something trying to happen, sort of buzzing and some vibration but nothing happens, maybe the brushes ? if so is there an easy way to replace them? - a good instruction sequence would be handy so I don't waste hours Machine is a Bosch Clasixx 1200: Type M8131 IPX4

B Campbell, November 2008

Some machines test the motor rotation on power up and if this is abnormal they simply abort the program. Check out the carbon brushes in the motor. Theyre graphite blocks which transfer mains power to the copper segments of the motor -Theyre probably worn down. They're quite cheap parts and easy to replace. Power off, remove the back cover and locate the motor. May help if the machine is tilted at an angle or laid on its side. The brushes are at the other end of the motor from the drive pulley. The holders are plastic or bakelite and are generally held in with screws or plastic clips. Also, look at the copper segments they run on to check for burning or pitting. If the segments are burnt or damaged you need a replacement motor or a replacement armature (motor part) if you can source one. Occasionally may be a fault in the motor drive circuit board - in which case replacement of board only real option.
Some machines are fitted with an induction motor - this type of motor doesnt have brushes. Its a much heavier and more reliable type of device, but needs a component called a start capacitor to set it in motion. If the start capacitor is faulty the motor cant get the kick it needs to get going.

Repair and service your own washing machine. Check out www.2ndwave.co.uk/manual.html

dannyboy, November 2008