GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

How to input a vauxhall corsa radio code after the battery has been changed?

I had a load of problems when i first bought my corsa over a year ago with the radio. Finally i managed to get hold of the radio code and eventually got some music. However, last weekend my battery died and had to be changed. Now whenever i turn the radio on it just says SAFE, i have the code but cant figure out how to enter it. Someone help me please!
Joy, December 2008
Has anyone got the code for a 2003 Corsa C plzzzzz I've lost the book during a move cheers

Maria sinclair, January 2016
Thankyou wildbil spot on music again now.

Techman, October 2013
thanks mate awesome - done it straight away - saved me a lot of *uckin about...good karma

P MAN, May 2012
when in SAFE mode hold down the AS button for about 5 sec turn ignition off while holding down the AS button then turn ignition back on again you should hear a bleep the safe mode will change to ---- put in your code using the 1-4 buttons then press the AS button to activated the code you will hear a bleep.
P.S
If the code was 5678 you would press the first button 5 times
button 2 6 times
button 3 7 times
button 4 8 times
Good Luck

wildbil, January 2012
If you have the correct code for the Radio there is an easier way to bypass the waiting time when the Radio displays the message SAFE. Hold the AS Button for 5 secs prior to switching off the Radio (ignition must be switched on) Hold the AS Button in while you switch on the Radio (ignition must be switched on) until you hear a bleep & SAFE changes to _ _ _ _ release the AS Button & enter the Code. Press & hold the AS Button until you hear a bleep & the Code will have been activated. Well it did for me last night after not having been able to use the Radio for months. Good luck & don't give up.

Tractor Boy, March 2011
Mr C I love you! Very kind of you to post instructions on here! I now have sound and it cost me 1 minute of my time and not a pennie! Woop Woop

Gem, January 2011
udno

k, December 2010
hi ive entered the wrong radio code in to my radio three time now it says 7 safe and i carnt seem to beable to get it to enter code now any ideas ?

adrian, December 2010
shout i hate you

stupd, December 2010
kick it

mr dopey, December 2010
timpson key cuters can get the code for you it costs 26.50 and you get key code radio code security code thes other codes will be needed if you ever lose your key

steve, October 2010
timpson key cuters can get the code for you it costs 26.50 and you get key code radio code security code thes other codes will be needed if you ever lose your keys

steve, October 2010
corsa 1.1 radio code

susan stewart, October 2010
Hi i brought a corsa a few months ago and my radio keeps sayin safe when turned on.please help.

claudette, July 2010
wat is the code that u put in the radio ?? or how would i get hold of the code i dont have any of my paper work or books 4 the car ?????????????????

lauren, June 2010
say hello

daniel clarke, January 2010
i had same problem, turn ign on then hold in AS button and turn radio on, it shud beep then _ _ _ _ shud come up, use the numbers on the radio to change top numbers, 1 moves the first 2 moves the second ex, and enter your code, then hold in AS again till it beeps, turn radio off then back on and that shud work. hope it helps

adam, May 2009
hiya i have no idea how to put the code in but it tells you how in the audio book. please would you tell me your code to see if it will go in mine. cheers from valley girl.

helen, January 2009
Switch Ignition on
Switch off radio
Press the AS button and hold depressed while turning the radio on. (after 3 secs you should hear a beep.
Release the AS button
The display should show "CODE"
Enter the code using preset buttons 1 2 3 4
eg Code 0365 _
Press button 1 once
Press button 2 four times
Press button 3 seven times
Press button 4 six times

To store press and hold AS button for around 3 secs until you hear the beep and the radio comes on again.

Mr C, December 2008
link Click here to see other fixes for Vauxhall.