The screen on my comp says no input.
My friend says this is possibly graphics card problem ,
if so will any graphics card fit into my comp.
comp is powering up as normal , just screen is not. screen is working on another comp ???

James, December 2008

Hi
Does it say no input from the second you switch it on or does it come on and then go off. Did it ever work on that PC and what has changed since then.
If display comes on then goes off - Restart your computer and press F8 whilst booting. Select VGA mode. If you get to a desktop change your display settings to 800x600 to start with and reboot.
If there is no display from the start - and the PC used to work with the card and doesn't now, then the card could have failed, but sometimes they work loose ("heat creep") if you don't mind going into your PC then disconnect all power and make sure your graphic card is pushed in properly..
More info jazzy@jazzyjeph.co.uk

jazzy jeph, December 2008

The pc is an E machines e4028

James, December 2008

No signal means just that. Unfortunately it could be anything; not just the graphics card and, without knowing more, it is not possible to say what it could be.

T, December 2008

what make /model pc ?
compdoctor2005@btinternet.com

Chris, December 2008