HI there first of all ,if the abs is working correctly ,the light will come on when the ignition first turned on,if the light goes out and stays out the computer has not detected a fault ,and should be working correctly,.the other thing you can check is the car battery location ,if the battery is located under the scuttle panel on the o/s , then first you need the radio code ,then remove the battery and check the drainage hole if that is ok then you need to remove the black plastic cover, from the fuse box that is located in that area, and there will be a connector on the far left check this one first as this is for the abs,and possably for the speed signal, if they are corroded then repair all that need repairing also check all the fuses make sure they are all ok ,if there is not faults in the fuse box then on the n/s in the engine bay there is another fuse/relay box just behind the headlight remove the cover and look for the connector which is green and check the connector, if ok then ,there is one more place to check and this is inside the car on the o/s foot well, remove the kick panel and make sure the large wiring connector is ok, if still not working then you will need to have it diagnosed,as they will need to check the abs computer ,and from there you can see if the computer is working correctly ,please let me know the out come of your checks .thanks mark
mark, December 2008