my candy dish washer beeps and shows fault code E4,can someone please tell me what this fault is, thankyou if you can help.

reg morton, December 2008

I have this problem but can't solve it as the dishwasher is built in, so can't tip it or turn it off as there seems to be no plug. Help!

Rachel, April 2013

Hi there,

I have found another solution.
It happenz that some things or just mushrooms build in the pump and blocks it.
Than there is a automatic routine, that the pump stops and pull back some water to pull out the shit.
So just only switch off the power and fill the maschine with water, about 3 or 5 litres, till the ground is full of water. Than the blocking thing should come out by waterpressure..
Just first try this, it is much easier... ;)
best regards Olly

Olly, September 2009

Quoted from http://www.fixya.com/support/t608691-candy_cdi_45_e4_code

"Solved it!! Make sure all water is pumped out of the machine. Switch it off at the wall and unplug. Tilt the machine forward (put a towel down first!) all the way till the door is on the floor, and let the rest of the water run out. Return upright, switch back on and Wahlah! it should work as normal. . . well ours did. Hope this helps "

George, August 2009

candy cdi 45-80 fault code e4 try turning of the power at the mains for at lest 10 mins

fltcondor, December 2008