mY C510 WON'T TURN ON AFTER I TURNED IT OFF

Ray longhurst, January 2009

The reset button did'nt work for mine but disconnecting the plug on the small circuit board and holding the off on switch for 10 secs did.

Hally, October 2013

27/8/12 Husband came home from work raging as his sat nav had died today, googled the issue and used your instructions, thank you so much, saved us at least £50 and as he uses it everyday for work its a vital piece of kit, so happy right now X :-)

Alex Copley, August 2012

I forgot my pin code for GARMIN STREETPILOT c510, how to start

ile, August 2011

Removing the cover and pushing the reset button worked for me.

Craig, July 2011

this advise has saved me buying a new one thank you very much

Jennie, February 2011

Thank you for the post. I tried removing the screws and detaching the battery and reconnecting. It worked on my c550!

you saved me from buying a new gps today.

Ang, November 2010

Paul, another thank you, very much. Similarly, pressing the reset on my dead StreetPilot didn't work for me this time but unplugging/discharging did.
Thanks again

Jill, May 2010

thanks for the advise i have just tried to reset and this didn't work so I unscrwed it and followed the first suggestion above and it worked, and i'm normally rubbish at stuff like this, thanks you've saved me having to buy another one.

adrienne, March 2010

If you have exausted all the usual options of reset buttons and are reasonably good with a screwdriver you can as a last option (if its out of warranty)
open up the case 4 screws behind the blue facia then gently disconnect the battery by the plug on the small circuit board then press and hold the power button for 10 seconds to ensure that the unit has fully discharged plug the connecter back in and if your lucky it will start up.
this worked for me with a street pilot c510

Please note that its not my fault if it does not work or you totaly kill it you took the thing apart lol

paul cleveland mobile computer repair, May 2009

Had this happen to mine. The resolve, remove the blue surround faceplate and hidden underneath you'll find the reset button. That should do it.

Richard, January 2009