does anyone have a idiots guide to flashing a starview cloned digi box

gordon, February 2009

thanks mick dont have anyone with old computer but will go to maplins and get cable and driver then i hope you dont mind me getting in contact with you again to show me how to do it many thanks gordon

gordon, February 2009

sorry gordon for takeing so long to get back , i got lost with other questions , you can get a usb to 9pin rs232 lead from maplins , but you must get the drivers for it , can be a pain , (maplins) do you know anybody that has a old pc/ or laptop . they have them on them , the best way to do it is with the null cable, 9 male pin , to 9 male pin , (maplins ) they say you can use the usb to rs232 converter ,but if you get make sure that you get a disk with it for the drivers , that will work with your verision of windows , try get a old pc from a friend , only takes 10 mins ..

mick, February 2009

hi mick my starview box has the 9 pin male but my laptop is a toshiba and only has a female 15 pin i dont know if this is what you mean or do i have to get laptop with 9 pins thanks gordon

gordon, February 2009

the first thing you must have to flash any box , is a pc/ laptop ,, with a rs232 port on it, if you dont know what that is , take a look at the back of the starview, and you will see one marked on it , rs232, , well you need the same port on your pc/ labtop, because you have to link up the starviewbox to the pc, with a null 9 pin cable ,male to male cable, so you can send the flash file firmwear" from the pc to the starview box , via , the null cable , so check that out first ,, mick

mick, February 2009