andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

Microwave fans/turntable have stopped working?

I have a Panasonic NN-A574SBBPQ, which suddenly failed with a small pop sound that triggered NCD device in fusebox and killed power to my house temporarily. Device is out of warranty, so opened it up and checked fuses ...found 2, both OK. Switched back on and tried a few things ... turntable* doesn't rotate and fans don't work, but grill comes on OK andon microwave setting will warm up a cup of water.
*I disconnected the turntable motor, wired up separately and it did seem to be working.
Any ideas?
LeCoop, February 2009
Hi, does the lamp work ? this a problem with panasonic sometimes. the lamp blows and kills part of the control panel pcb. Remove this and check for damage. if you find it do not repair the track, the problem is with one of the diodes on the board, just repalce the board, not the lamp waste of time.
kindest regards
B.E.S. Microwaves
01424 447799
microwave-repairs.co.uk

patrick, March 2009
link Click here to see other fixes for Panasonic NN-A574SBBPQ.