Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

hotpoint washer problem?

i have a Hotpoint WM76 washing machine, over the last few days it has stopped taking the conditioner during the washing process and the fabric conditioner is left behind. i have taken the drawer out and gave it a quick clean but the problem is still there, any suggestions
jb durham, February 2009
Fabric conditioner is taken from the detergent tray by siphon action. Most likely flexible siphon pipe is blocked. Power off, drag machine out onto the floor, remove machine top, identify the pipe coming from the softener compartment, detach and clean.The siphon action to lift conditioner is generally activated by a mechanical linkage from on of the cams on the programmer. Some other machines have a small motor to activate the conditioner dispenser. Check any linkages, after that disassemble the dispenser body to check for internal blockages in the air channels.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy, February 2009
try opening the machine and you should find two solenoids
by the try check if there is power going to it if not most likely thats the problem cos the soleniods let the water in diff trys

sal, February 2009
link Click here to see other fixes for Hotpoint.