Having got hold of a new Rangemaster 110 timer I need to replace it. How do I remove the front panel to get to the existing timer? After removing the control buttons and taking out the bottom screws the panel is still attached. Can you help?

Ken Dickenson, March 2009

Hi,
You have to get the range out to remove four screws that go through the flue trim at the back two pretty much near the centre and one at either end. from the front remove four screws under the pan supports on the left hand hotplate lift this back and out of the way moved back four inches is ok.On right hand hotplate lift off griddle remove two pozis that youll see left hand side, slide that hotplate to the right and itll come off. lift back by 4 inches. remove screw that are screwed vertically down through facia hey presto facsia will pull forward and off pull off control knobs.

banni, April 2009