Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

plumbing bath?

l have had a bath installed which l think is too high, is there a regulation height from floor to top of bath
Margaret, March 2009
No regulation that I know of. Some plumbers set the baths height to get the waste to fall to the drain. You don't want the waste pipe lookking uphill!!

Most baths are about 20" to 21" high. I generally set the height of the bath to match the bath panel. If the waste height is a problem, we either redo to waste pipe to make it lower or use a low trap.

Some wooden bath panels are 18" high and have an adjustable section that can be adjusted to add 1" to 4" to give a range from 19" to 22".

Jason, March 2009
I normally put them inbetween 550 & 600mm, depending on the lay out, or customer preferance. You have to make sure that it is safe enough to "cock" your leg over without loosing balance, even your old aunti gladdis when she comes once a year for christmas.

neps, March 2009