Yes you can fix it, just replace those 4 capacitors with bulging top. Very easy as its just a single layer board, no complications at all. Make an attempt, u don't loose anything... Just $ Australian Dollars ...
Benny- Melbourne, February 2011
i offer a repair service for this board and others for anyone who is not good with a soldering iron all work is guaranteed, have a look at my website for more info.
thanks
andy
andys electronic stuff
http://www.andyselectronicstuff.co.uk/index.html
andys electronic stuff, October 2010
can i fix it
john, August 2010
many thanks for the info managed to fix mine to. this seems to be a fault with this model worldwide samsung are just ignoring it though will never buy any type of equipment from them again
glen, May 2010
There are two blue parts in the high voltage section, one of them appears to be burned. Can anyone ID them for me?
Ron, February 2010
it would be better to get these caps in higher voltages. it would last longer in case the same problem happens again in 2-3 years time.
op2bts, November 2009
go to radio shack buy four 272-1032c capasotors and replace them on your board labled cpasotors cs806,cm811.cm812 and cm817 very easy fix ..mine works grat now like new did it myself including soldering kit from radio shack for 32.00
mytoolguy, August 2009
Fixed mine and drew up this doc to help others.
http://www.megaupload.com/?d=U61DEBJ2
Thanks
Dal, July 2009
Just fixed my tv aqs well with your tip and it works perfectly!! Saved me a bundle. Thanks THANKS!!!!!
Joe Andrews, June 2009
THIS IS A TOP NOTCH PEICE OF INFO JUST DONE MY MATES FOR HIM NOW WORKING PERFECT
R40PMD, June 2009
replace the four (capasitors) Al Electrolytic Cap 105C 10V 1000uF that have blown from (rswww.com part No. 526-1115) rs now sell to the public cost under £2.00
make sure the capasitors go back the same way the (- strip) goes to the bold possition
(maplins only do 16v does work but would be best to use correct voltage)
lester, June 2009
there is a kit available on ebay for £12.99, look under model number le40r74bd
john, May 2009
thanks aniff changed the 4 resistors jobs a good one
cost me £1
tv people wanted £50.00 to collect
then £75.00 to take back off
replace the power supply board £130
plus labour
john, May 2009
change the resistor which you can buy from maplin it will cost you £2 in total and solder it on and and will solve your problem
