how to with legs

sal, May 2009

Hi there

Please can you help.

I have damaged my plastic kickboard and I have managed to crack the plastic not the chip board. Can you recommend anything to cover up the crack

Sam, October 2009

Depending on the diameter of the legs, buy some spring Terry clips and screw to the back of the kickboards. Lay the kickboards face down flat on the floor to mark the position of the legs. Click this link:-

http://cgi.ebay.co.uk/20-X-STORAGE-CLIPS-SPRING-TERRY-TOOL-19MM-1-89-PACK_W0QQitemZ260378097645QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item3c9fbe77ed&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A2%7C72%3A1683%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A24

chippy, June 2009

You use Plinth Clips aka Kickboard Clips

http://www.screwmaster.co.uk/ekmps/shops/screwmaster/images/plinth_clip_500px_wm.jpg

Ceap from H/W or DIY store.

Screw bracket to kickboard and slide plastic clip in - they can move sideways to adjust to the legs so positioning is not much of an issue.

Good luck...

Peccavi, May 2009