Now that I have pretty much determined that the problem with my Kenmore washer (thanks to all who responded) is the lid switch, how do I take the lid off to get to it?

csrich, January 2006

Hello,

The whole cabinet is removed in one piece. Start by removing the plastic endcaps (if you have them) on your console. Once these are removed, remove the screws to the console and pull the console towards the front slightly then flipping it back. Under the console you will see the lid switch connector, unplug it. Stick a flat screwdriver into the clips and push handle toward the rear of the washer to release the clips. Once those are out stand in front of the washer grab the middle and side of the cabinet and rock it toward you and place it out of the way. The lid switch is under the cabinet. Hope this helps.

JP, January 2006