My Samsung B1415J BIG WASH has stopped working and is reporting error code E4.

Does anyone know what this means ?

What action should i take ?

Can i find the error codes anywhere on the web ?

All help greatfully recieved,

Many thanks,

Ian Dowle in Perth Australia.

Ian Dowle, January 2006

what does E6 Mean?

aliya, January 2011

what means E1 ?

R.GHANBARNIA, December 2010

E4 means laundry load is unbalanced; loosen any tangled laundry. For example one item in the machine will lead to unsatisfactory spin and an "E4" error message will be shown

Can anyone help on "E5" code?

Johnny, July 2010

HE fault on wash cycle stops halfway through a info to rectify fault

t clark, April 2010

I cant get my filter cover off!!! It seems to be stuck - like its melted a little bit into the holder. It just wont turn! Is there any other way of accessing the filter?

laura, February 2010

What does sud5 error code mean for my Samsung frontloader washer?

Tara, October 2009

Remove the water pump, very accessible from the back, remove the center cover. You can get most of the water out by pulling the drain line through the back plate and lower it into a bucket. The rest of the water I just used towels. Open the water pump and see if there is any debris in it, I found a quarter. Reinstall and try it. Pretty easy to do, took me a half hour.

Eric, May 2009

E2 - Is the code for the Debris Filter being blocked.

Had this before and found a sock had been minced in the mechanisim and had jammed the propellor.
The tricky bit is getting access to it with all the water in it.
You could try the manual release button, catch the water and drain it manually.
Then open up the filter to see what is causing the issue. It took a few days for the debris to come out, and if I recall 3 attempts at clearing it until all was fine.
Usually this is something you can do yourself for free, I would expect if you called out under warranty you might get charged.

Mark, February 2009

my washing machine keeps coming up with E2 what does it mean

leeanne Duxbury, September 2008

we have a samsung front loading washer, it has stopped in mid cycle with error code nd...any advice. we've missplaced our warranty and lowes is no help. we can't get the door off. tried all the - shut it off, change the cyle, power cord, etc. no luck.

morgan, August 2008

laundry load is unbalanced or tangled up.

dawn from warminster, June 2008

Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as
a bathrobe or jeans, the final spin result might
be unsatisfactory and an "E4" error message will be shown
in the display window.

Michael, October 2007

http://downloadcenter.samsung.com/content/UM/200411/20041124151342484_B1515-01527B-0603.pdf#search=%22samsung%20big%20wash%20b1415j%22

check out this website for all fault codes and online manual

i have the same washing machine i get that problem somtimes but apart from that it the best machine i ever had

happy, October 2006

check wash filter a bottom of machine. Once you open the caseing. At the front next to the filter there is a small hose to relase the water in the machine once you are finished release the filter lid and you can see if there is any rip carments stopping the small propeller fron turning hope this helps Keni

keni houston, September 2006