have azanussi washer/drier and drier seems to be faulty. an E20 message comes up so I cleaned the drain pump and drier works for 1 minute then E20 message appears again. Can anyone help?

ticker, June 2009

e20 is a draining issue.if the filter is clean then you need to look at the drain pump.check the impellor is rotating freely and isn't jammed with something.check windings on pump coil.possibly requires a new pump or if you are unlucky the pump might of blown the triac on the main control pcb and this will need replacing along with the drain pump

ck, June 2009