Classic fault on the main module in the bottom of the machine. We stock them at £44.90+vat (£39.90+£5 post). Call us on 0115 9652118 to order or order online at www.emwelec.co.uk Once you change the module, the water will stop !
EMW, June 2009
pressure chamber switch possibly faulty.or a blocked or split pipe.
try this first remove top of machine and locate pressure switch( a round thing with wires on and a plastic tube)
remove tube and blow down pipe if you go red pipe is blocked trace the pipe down to the pressure chamber remove pipe and clean out the small hole of caked up washing power etc reassemble pipes both ends retry filling machine
wirecutterman, June 2009
check that the outlet hose is not lower than the drum , , it should be going up to the outlet pipe.
