Hi
The timer/programme switch seems to be stuck on the empty cycle, will turn to all programmes but will only empty. Only way to stop it is to switch off at power button, switch back on and it is still on the empty cycle.Any ideas.
Thanks Ernie

Ernie, June 2009

Great spoton many thanks

ERNIE GREEN, June 2009

you have more likely had a leak and the base is full of water. the anti flood won't reset until the water is out from under the machine. tip the machine back and see if any water comes out, its normally the drain hose, they have a habit of lifting and touching the element near the pump connection.

foot, June 2009