My Kitchen Aid Blender KSB5WH3 stopped working and is flashing all lights when I power up. I had read somewhere on the internet that i need to change the fuse. What fuse?
I can't find it. Can someone tell me what i need to do to fix this expensive blender?

Cath, June 2009

I am having the same problem and did some searching and found this tutorial video you YouTube: https://www.youtube.com/watch?v=VrzPdgDJ_js
It might help you but I think it's a bit complicated and almost seemed like too much effort, but it's worth a look anyway.

Arbym, January 2021

I had the same problem. Then I unplugged the blender and let it sit for an hour or so and when I plugged it back in it was fine.

DaveTheRave, September 2014

I followed this advice and it worked perfectly. Was able to get the fuses at radio shack in a pack of 4. Easy and inexpensive fix.

Stephen, August 2010

Hi,
easy fuse change on your blender. If you can get the fuse...First, remove the little rubber legs on the bottom of the blender by simply pulling them up. Underneath them are screws. Undo them and pop the bottom off. Inside you will see red wire go from the electronic pannel to the coupling, with plastic two piece cover in between. Pull the cover appart and there is the fuse !!! YAAAAAAAAAAAy.....I came upto this YAAAAAAy part but cannot find the same fuse, but I am hoping. Good luck !

Ivana, October 2009