hello,

Ive been without central heating for 4 days and its freezing, my boiler is 'vokera linea 24' and the water pressure gauge displays '0.5'. When the hot water is turned on the gauge displays '0.3'. I have looked at the manual and it tells me to 'turn the filling inlet valve slowly virtically down to filling position, and u will hear water entering the system boiler' i have done that and i cant seem to hear any water going to the system boiler nor is the pressure gauge moving any further than '0.5'. The manual states the pressure should be between '1.0 and 1.5' so can u help please?

samantha, January 2006

where you turn the filling inlet valve there should be another next to it with out the valve but a blocking nut instead you need a metel flexi pipe to attach from filler valve to heatin outlet pipe all you do then is turn on and wait for the pressire to build up then turn off and disconect pipe and put nuts back on. this is how mine works. hope this helps

sean, February 2006

I still dont know how to fix the problem, if you can find out jay that will be much abliged.

Thank you

samantha, January 2006

i have the same problem a plumber is fixing it tomorrow 31-1-06
will let you know what to do or if you know the answear already could you repost it for me.
thanks

jay, January 2006