home Fix label Household Appliances label_important Washing Machines category Indesit

How do i fix my indesit w123 washing machine?

hi, i have an indesit w123 washing machine which stays on the rinse cycle until stopped, you can reset it and put it on to spin but the clothes dont seem to be fully washed, i suspect it has something to do with the water heater, where is the water heater and how do i fix it if its malfunctioning

thank you

andy

andrew rennie, September 2004

home Fix label Household Appliances label_important Washing Machines category Indesitdone

my washing machine is poring out water from under neath

sharon davies, December 2004

thank you, i replaced the inlet and the machine is working perfectly again.

once more

many thanks
andrew

andrew rennie, October 2004

to test the selenoid check with a meter that there is a resistance across the two terminals but remove the wires first if it is open curcuit ie no reading you will need to replace the valve you did not say how many outlets there are one the cold water valve

RS, September 2004

how do i check the valve, ie should there be a resistance accross the two connectors on the solenoid and how do i fix it if its broken

thanks

andrew rennie, September 2004

The cold fill pipe fixes to the cold water inlet valve if you look inside the m/c you will then see where the valve selenoids are located

RS, September 2004

where do i find the cold water inlet valves?

andrew rennie, September 2004

Check the cold water inlet valves it sounds very much like the one that supplys the water to the conditioner is not working.
The heater is not in use during the rinse cycle

RS, September 2004

link Click here to see other fixes for Indesit.