katlego asked ... Rev count on my 1982?    |    andrew asked ... "SECURE" on a yellow backround, and I cant ge?    |    Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Click here to ask your question

I have a hotpoint aquarius wd420 which won't work?

The on/off buttons have stuck in place and the display just keeps flashing 'test'. There is nothing in the operating manual to help and the washer just won't work. It is about 9 months old. Thankyou
anne, February 2006
I don't know if you are aware of the filter pipe underneath the drum inside the small back panel.
Our machine was showing a fault, by the on/off button flashing and the second and fourth button was illuminated.
We searched for the instruction manual, but it wasn't to be found, so I removed the back panel (the small plastic cover near the bottom at the back of the machine) and took a look at things to see if anything was amiss.....I then removed the black pipe (wide black rubber pipe that is connected to the bottom of the drum and is also connected to a white plastic tube that goes upwards to the side, it then is connected to the waste pipe so the water can escape the machine) and lts of gunge came out of the pipe.
Clean this black pipe and it should fix the problem, as this pipe should be routinely cleaned...so I found out.

I hope this helps,

Darrin H., April 2008
link Click here to see other fixes for Hotpoint Aquarius.